{"id":2862,"date":"2024-03-14T04:05:28","date_gmt":"2024-03-14T04:05:28","guid":{"rendered":"https:\/\/gearboxesworm.xyz\/china-hot-selling-czpt-arrow-selling-the-good-quality-cost-effective-products-extruder-gearbox-wholesaler\/"},"modified":"2024-03-14T04:05:28","modified_gmt":"2024-03-14T04:05:28","slug":"china-hot-selling-czpt-arrow-selling-the-good-quality-cost-effective-products-extruder-gearbox-wholesaler","status":"publish","type":"post","link":"https:\/\/gearboxesworm.xyz\/es\/china-hot-selling-czpt-arrow-selling-the-good-quality-cost-effective-products-extruder-gearbox-wholesaler\/","title":{"rendered":"China Hot selling CZPT Arrow Selling The Good Quality Cost-Effective Products Extruder Gearbox wholesaler"},"content":{"rendered":"
\n
\n

Product Description<\/h2>\n

\n

Overview<\/b> <\/p>\n

Product Description\u00a0<\/b> <\/p>\n

\n

\n

Wide Selection of Gearbox Products<\/b>
The gearbox usually adopts a general design scheme, but in special cases, the design scheme of the gearbox can be changed according to the demands of the user, and it can be modified into an industry-specific gearbox. In the design scheme of the gearbox, the parallel shaft, vertical shaft, general box, and various parts can be changed <\/p>\n

\n

<\/p>\n

\n

\n

Advantages<\/b> <\/p>\n

    \n
  • Absorption of very high torques<\/b> and axial forces<\/b><\/li>\n
  • No need for separate thrust housing & bearing<\/b>.<\/li>\n
  • Easy alignment<\/b> (screw directly fits into the vore of gear box)<\/li>\n
  • Easy to assemble & dismantle.<\/b><\/li>\n
  • Very heavy duty spherical roller thrust bearing<\/b> is provided.<\/li>\n
  • Power saving<\/b>. (you may save up to 20 % power.)<\/li>\n
  • Less requirement of space<\/b>.<\/li>\n
  • For bigger sizes water cooling<\/b> is provided\u00a0<\/li>\n
  • No maintenance required except periodic oil level checking.<\/b><\/li>\n
  • Higher productivity\u00a0<\/b><\/li>\n<\/ul>\n

    \n

    <\/p>\n

    \n

    \n

    Features<\/b> <\/p>\n

    \u00a0 <\/p>\n

      \n
    • Twin Screw Extruder Gearboxes offer the dual shaft counter rotating<\/b>. The range is available for various center distances <\/b><\/li>\n
    • The gearboxes are available with co-rotating and counter rotating variants <\/b><\/li>\n
    • To work under heavy loading force, the high level dissipation and oil lubrication system<\/b> are provided. The axial roller type swivel thrust with the thrust bearing coupled in tandem way support the axial thrust <\/li>\n
    • High torque and high speed output rate <\/b><\/li>\n<\/ul>\n

      \n

      \u00a0 <\/p>\n

      \n

      \n

      Processing Characteristics of Screw Shaft:<\/b> <\/p>\n

      1.Suitable suggestion on material to ensure components performance and extend lifetime of products.<\/b>
      2.Professional technical team can provide surveying and mapping support.<\/b>
      3.All components are finished by CNC machine.<\/b>
      4.Sophisticated quality management system<\/b> ensure superior quality.
      \u00a0 <\/p>\n

      \n

      Basic Info.<\/b>
      \u00a0 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
      Warranty: 1 year<\/td>\nWeight (KG):
      500 KG<\/td>\n<\/tr>\n
      Place of Origin:
      HangZhou, China<\/td>\n      		Gearing Arrangement:
      helical<\/td>\n<\/tr>\n
      ratio:
      8-20<\/td>\n      		Output Torque:
      2*176
      \u00a0<\/td>\n<\/tr>\n
      standard:
      JB\/T8853-2001<\/td>\n      		Certificate:
      CE<\/td>\n<\/tr>\n
      Heat treatment:
      High-frequency Hardening<\/td>\n      		Efficiency:
      94%~98%(depends on the transmission stage)<\/td>\n<\/tr>\n
      Customized support:OEM ODM<\/td>\nInput\/output shaft material
      40Cr<\/td>\n<\/tr>\n
      Package:
      Wooden case
      \u00a0<\/td>\n      		Mount position:
      Flange, hollow shaft, CHINAMFG shaft<\/td>\n<\/tr>\n
      After-sale:Online 24\/7 Installation Xihu (West Lake) Dis.<\/td>\nadvantage:
      excellent quality<\/td>\n<\/tr>\n
      Reduction radio:
      3:1
      \u00a0<\/td>\n      		Mount Position:
      Horizontal Foot Mounted Vertical
      \u00a0<\/td>\n<\/tr>\n
      Input Speed:
      1500
      \u00a0<\/td>\n      		Output Speed:
      500
      \u00a0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      Packaging & delivery<\/b> <\/p>\n\n\n\n\n
      \n

      Packing:\u00a0<\/strong>wooden case packing<\/p>\n<\/td>\n

      		\u00a0<\/td>\n<\/tr>\n
      Port: <\/b>HangZhou Port<\/td>\n\u00a0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      \n

      \n

      \n

      \n

      Aplicaciones<\/b>
      X helical gear units for double-screw extruders with parallel drive shafts and the same direction of screw rotation are used mainly in the manufacture of granulates and the refining of raw plastics. Other areas of application include: <\/p>\n

        \n
      • Paint and lacquer industry<\/li>\n
      • Washing agent industry<\/li>\n
      • Foodstuff industry (e.g. bread, pasta)<\/li>\n
      • Animal-feed industry (dog, cat other animal food\u00a0<\/li>\n<\/ul>\n

        Maintenance of the gearbox of the dual-screw extruder<\/b>
        1. The gear box of the dual-screw extruder should be well-ventilated, and the working environment temperature should be within the range of 5-35 \u00b0C.
        2. Always check the oil quantity of the gear lubricating oil in the box to ensure that the transmission parts in the box are well lubricated.
        3. Pay attention to check the bearing parts of the box frequently. The oil temperature of the oil tank of the transmission box should not exceed 70 \u00baC during operation.
        4. The newly put into use gearbox needs to replace the lubricating oil after 250 hours of operation. The oil change time depends on the state of the oil. It is recommended to replace it after 4000-8000 hours of operation or once a year.
        5. The gearbox of the dual-screw extruder needs to be regularly maintained and inspected once a year\u00a0<\/p>\n

        Operating Process<\/b>
        1. The gear on the input shaft is driven by the motor and starts to rotate.
        2. The rotating input gear meshes with other gears inside the gearbox, transmitting power.
        3. Different-sized gears within the gearbox are combined to form a gear train. Through continuous meshing and rotation, the high-speed, low-torque power from the input shaft gradually converts into low-speed, high-torque output.
        4. The output shaft is connected to the last gear and transfers the output torque to the load.
        5. Gear reduction gearboxes typically include lubrication and cooling systems to ensure smooth operation and prevent overheating and damage.
        6. Our extruder gearbox converts high-speed, low-torque power into low-speed, high-torque output by changing the size ratios and meshing arrangements of different gears, achieving the function of speed reduction.<\/p>\n

        Types of Gearboxes:<\/b>
        Based on customer requirements, gear reduction gearboxes can be classified according to the size of the output shaft, center distance of the output shaft, output speed, and torque. Alternatively, we can provide several commonly used types of gearboxes for customers to choose from.<\/p>\n

        Product Service<\/b><\/h5>\n\n\n\n
        \n

        24-hour Hotline<\/strong><\/p>\n

        \u00a0<\/p>\n

        No matter when and where<\/p>\n

        to call we can find our service to you.<\/p>\n

        \u00a0<\/p>\n

        \u00a0<\/p>\n<\/td>\n

        		\n

        Pre-sales Consultation<\/strong><\/p>\n

        \u00a0<\/p>\n

        We have 5 sales people online,<\/p>\n

        and whether you have any question<\/p>\n

        can be solved through online<\/p>\n

        communication.<\/p>\n<\/td>\n

        		\n

        After-sales Services<\/strong><\/p>\n

        \u00a0<\/p>\n

        Receive products have any<\/p>\n

        questions about the product,<\/p>\n

        can look for us,we will help<\/p>\n

        you deal with the the first time,to your satisfaction.<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

        Exhibition
        <\/b>
        Certificate<\/b><\/h5>\n

        Company profile<\/b>
        ZheJiang Arrow Machinery Co., Ltd.is a company specializing in R&D, production, sales, application promotion of food engineering projects. As 1 of the largest scaled food processing equipment &whole plant engineering problem solvers in China, machines served for more than 970 companies, export to 116 countries, area, more than 20 years engineering team, we recognize that quality equals value, aims to create a great future together with global customers. <\/p>\n

        FAQ<\/strong><\/p>\n

        \u00a0<\/p>\n

        \n

        1.\u00a0 Q:\u00a0How about Arrow Machinery?<\/p>\n

        \u00a0\u00a0\u00a0\u00a0 R:\u00a0ZheJiang Arrow Machinery Co., Ltd. is a High-Tech company. Our firm is composed of a strong \u00a0<\/p>\n

        \n

        \u00a0 \u00a0 \u00a0 \u00a0 team which has substantial experience in R&D, manufacture, technique and sales service and has<\/p>\n

        \u00a0 \u00a0 \u00a0 \u00a0 specialized in extruder industry for 10 years,leading screw barrel manufacturer in China.
        2. Q:What’s Arrow machinery’s capacity?\u00a0
        \u00a0 \u00a0 R:Company is in strict accordance with CE and ISO9001 quality certification system.There are over 200<\/p>\n

        \u00a0 \u00a0 \u00a0 \u00a0models of extruders and spare parts.\u00a0<\/p>\n

        3. Q:What’s the delivery time?\u00a0<\/p>\n

        \u00a0 \u00a0\u00a0R:For regular size, we have finished stock and semi-finished stock, 2 weeks max enough<\/p>\n

        \u00a0 \u00a0 \u00a0 \u00a0 for customized, normally within 20days .<\/p>\n

        4. Q:How about the gearbox quality and price?\u00a0
        \u00a0 \u00a0 R:\u00a0top quality in China with competitive price and globle after-sale service
        5.\u00a0Q:what’s the life time and guarantee buy from Arrow machinery ?
        \u00a0 \u00a0\u00a0R:\u00a03~5years life time\u00a0for nitriding ones and bimtallic ones will be longer\u00a0
        \u00a0 \u00a0 \u00a0 \u00a0\u00a0One year min. Guarantee.
        6.Q:Where is Arrow Machinery\u00a0factory and how to reach there?\u00a0
        \u00a0 \u00a0R:NO.47 Chengbohu\u00a0Road, Xihu (West Lake) Dis. District,HangZhou City, China. You can take the train or plane\u00a0to HangZhou and we can pick\u00a0 \u00a0 \u00a0 \u00a0 you up.
        7.Q:How to contact with you?\u00a0
        \u00a0\u00a0\u00a0R:just reply to me if have any question.\u00a0<\/p>\n

        \t\/* January 22, 2571 19:08:37 *\/!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(\/(.*?):(.*)$\/))&&1\t <\/p>\n

        \n

        \n