![\"worm](\"https:\/\/gearboxesworm.xyz\/wp-content\/uploads\/2026\/06\/agricultural-application.webp\")
<\/p>\n
Grain Auger Drive Requirements<\/h2>\n
A grain auger worm gearbox faces unique challenges: seasonal operation (1\u20133 months per year) followed by long storage periods; exposure to ultraviolet radiation, morning dew, and rain during harvest; fine grain dust that accumulates in every crevice; and the requirement for the drive to start reliably after months of inactivity. The worm gear’s self-locking property also prevents grain from back-feeding when the drive is stopped on an incline.<\/p>\n
Material & Sealing Specifications<\/h3>\n\n- Housing:<\/strong> Cast iron or lightweight aluminium alloy \u2014 aluminium reduces transport weight for portable auger systems.<\/li>\n
- Seals:<\/strong> UV-resistant nitrile or FKM shaft seals; anti-dust lip seals \u2014 resists degradation during outdoor storage between harvests.<\/li>\n
- Finish:<\/strong> Powder-coated or oven-baked primer\/enamel \u2014 withstands UV, grain acids, and cleaning chemical splash.<\/li>\n
- Lubrication:<\/strong> Long-life synthetic gear oil \u2014 maintains viscosity through wide temperature range (dawn frosts to 40\u00b0C midday peak).<\/li>\n<\/ul>\n
Technical Specifications<\/h2>\n\n\n\nParameter<\/th>\n Value<\/th>\n<\/tr>\n \nGear Ratio<\/td>\n 7.5:1 \u2013 60:1<\/td>\n<\/tr>\n \nInput Speed<\/td>\n 540 rpm (PTO) or 1,450 rpm (electric motor)<\/td>\n<\/tr>\n \nTypical Auger Speed<\/td>\n 80 \u2013 200 rpm<\/td>\n<\/tr>\n \nOutput Torque<\/td>\n Up to 1,500 Nm (standard)<\/td>\n<\/tr>\n \nHousing Material<\/td>\n Cast iron or aluminium alloy LM6<\/td>\n<\/tr>\n \nMounting<\/td>\n Flange-mount (B5\/B14) or foot-mount<\/td>\n<\/tr>\n \nShaft Options<\/td>\n Solid keyed; square 1-3\/8″ or 1-3\/4″ PTO adapter<\/td>\n<\/tr>\n \nProtection Rating<\/td>\n IP55 dust\/spray resistant<\/td>\n<\/tr>\n \nSeasonal Storage<\/td>\n Suitable for outdoor storage; drain plug for off-season<\/td>\n<\/tr>\n<\/table>\n<\/div>\nService Factor:<\/strong> Grain augers starting under load (e.g., when restarting a half-filled tube) require a service factor of 1.5\u20132.0. Electric-motor driven augers with direct-on-line starters should use the higher factor to account for the locked-rotor torque at start-up.<\/p>\nStandards & Certification<\/h2>\n
Agricultural worm gear drives are manufactured under ISO 9001:2015<\/strong> quality management, carry CE marking<\/strong> for export markets, and comply with IEC 60072<\/strong> for motor-flange compatibility. For PTO-driven variants, input shaft dimensions follow ASAE S203<\/strong> (1-3\/8″ and 1-3\/4″ 6-spline standards). Housing protection conforms to IP55<\/strong> as a minimum for exposed outdoor agricultural machinery.<\/p>\nCase Studies<\/h2>\n\n\n <\/div>\nWheat Farm \u2014 Moora, WA<\/p>\n
Portable field-to-bin grain auger<\/p>\n
Challenge:<\/strong> Aluminium-cased gearbox failed after one season due to UV degradation of seals and moisture ingress during storage.<\/p>\nSolution:<\/strong> Replaced with UV-resistant FKM seals and sealed drain plug; synthetic oil recommended for off-season storage.<\/p>\nOutcome:<\/strong> No seal failures or moisture ingress across 3 harvest seasons; operator reports easy restart after 8-month winter layup.<\/p>\n<\/div>\n\n <\/div>\nCorn Harvesting Cooperative \u2014 Riverina, NSW<\/p>\n
Header to chaser bin auger<\/p>\n
Challenge:<\/strong> PTO-driven auger gearbox damaged when tractor over-ran rated PTO speed during headland turns.<\/p>\nSolution:<\/strong> Specified higher-ratio gearbox (25:1) and PTO shear bolt \u2014 gearbox now rated for 20% PTO speed overshoot.<\/p>\nOutcome:<\/strong> No further gearbox damage; shear bolt protection provides mechanical overload protection valued by operators.<\/p>\n<\/div>\n\n <\/div>\nCanola Farm \u2014 Esperance, WA<\/p>\n
Storage shed receiving auger<\/p>\n
Challenge:<\/strong> Fine canola seeds passed through standard dust-seal gaps into gear oil, contaminating the lubrication within one season.<\/p>\nSolution:<\/strong> Fitted double-lip contact seals and switched to food-compatible synthetic oil to allow grain contact without contamination.<\/p>\nOutcome:<\/strong> Zero oil contamination detected in 2 full harvest seasons; grain quality certificates unaffected.<\/p>\n<\/div>\n<\/div>\nWhy Farmers Choose Our Gearboxes<\/h2>\n\n\n <\/div>\nHarvest-Ready Every Season<\/strong><\/p>\nUV-stable seals and corrosion-resistant finish survive long outdoor storage between seasons.<\/p>\n<\/div>\n
\n\u26a1<\/div>\nElectric & PTO Compatible<\/strong><\/p>\nFlange-mount electric and square-bore PTO input options \u2014 one gearbox family covers all auger types.<\/p>\n<\/div>\n
\n <\/div>\nDrop-In Replacement<\/strong><\/p>\nStandard dimensional compliance ensures replacement of branded OEM gearboxes without auger modification.<\/p>\n<\/div>\n
\n <\/div>\nWashdown Safe<\/strong><\/p>\nIP55 rating handles rain exposure, morning dew, and grain-shed wash-down.<\/p>\n<\/div>\n
\n <\/div>\nFast Dispatch<\/strong><\/p>\nHarvest-season stock held in Australian distribution \u2014 critical when every hour of harvesting weather counts.<\/p>\n<\/div>\n<\/div>\n
Frequently Asked Questions<\/h2>\n\n▼ What gear ratio should I use for a 540 rpm PTO grain auger?<\/summary>\nFor a typical grain auger target speed of 150\u2013200 rpm, divide PTO speed by target: 540 \u00f7 150 = 3.6 \u2014 so a 4:1 ratio would give ~135 rpm. For 200 rpm: 540 \u00f7 200 = 2.7 \u2014 a 3:1 or 2.5:1 ratio. Most portable grain augers use 3:1 to 7.5:1 PTO ratios depending on auger diameter and target grain throughput.<\/div>\n<\/details>\n\n▼ How do I prepare a grain auger gearbox for winter storage?<\/summary>\nBefore storage: drain old gear oil while warm; refill to mid-level with clean synthetic oil to displace moisture; seal the drain plug and vent. Coat exposed shaft surfaces with anti-rust spray. Store in a dry, covered location if possible. Before the next season: check oil level and condition; inspect seals for cracking; run briefly at no load before engaging grain load.<\/div>\n<\/details>\n\n▼ Can I use food-grade gear oil in a grain auger gearbox?<\/summary>\nYes \u2014 H1-registered food-grade synthetic oils (NSF H1) are suitable and recommended for grain augers where grain contact with gear oil is possible. H1 oils are formulated to be non-toxic in incidental food contact and are approved for use in food processing and grain handling equipment.<\/div>\n<\/details>\n\n▼ What causes grain auger gearboxes to fail prematurely?<\/summary>\nThe most common causes are: over-speed (exceeding rated input rpm); over-loading (choked auger tube requiring start-up against settled grain); moisture ingress during storage (degrading gear oil); and UV seal degradation (seal becomes hard and fails to exclude dust). Most failures are preventable with correct selection and seasonal maintenance.<\/div>\n<\/details>\n\n▼ Are spare parts available for your grain auger gearboxes?<\/summary>\nYes \u2014 worm gear pairs, bearing kits, seal sets, and oil drain plugs are stocked for all current models. For older or discontinued models, we can machine matched worm gear pairs to your dimensions as a service. Contact our parts team with the gearbox model number and year of purchase.<\/div>\n<\/details>\n\nTalk to Our Drive Specialists<\/h2>\n
Get the right worm gear solution for your application \u2014 fast.<\/p>\n
✉ Get in Touch<\/a>🔧 Browse Products<\/a><\/div>","protected":false},"excerpt":{"rendered":"Worm Gearbox for Grain Auger \u2014 Efficient, Weather-Resistant Drive for Agriculture Australia’s grain industry \u2014 from the vast wheat farms of the WA wheatbelt to the sorghum fields of southern Queensland \u2014 relies on auger conveyors to move millions of tonnes of grain from header hoppers to field bins and storage silos every harvest season. […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[9077],"tags":[9079,9084,9081,9082,9083,9080,9078],"class_list":["post-3289","post","type-post","status-publish","format-standard","hentry","category-agriculture","tag-agricultural-worm-reducer","tag-auger-conveyor-gearbox","tag-compact-worm-gearbox-grain-handling","tag-worm-drive-reducer-pto","tag-worm-gear-reducer-agriculture","tag-worm-gear-unit-farm-auger","tag-worm-gearbox-grain-auger"],"_links":{"self":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts\/3289","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/comments?post=3289"}],"version-history":[{"count":0,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts\/3289\/revisions"}],"wp:attachment":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/media?parent=3289"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/categories?post=3289"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/tags?post=3289"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Technical Specifications<\/h2>\n\n\n\nParameter<\/th>\n Value<\/th>\n<\/tr>\n \nGear Ratio<\/td>\n 7.5:1 \u2013 60:1<\/td>\n<\/tr>\n \nInput Speed<\/td>\n 540 rpm (PTO) or 1,450 rpm (electric motor)<\/td>\n<\/tr>\n \nTypical Auger Speed<\/td>\n 80 \u2013 200 rpm<\/td>\n<\/tr>\n \nOutput Torque<\/td>\n Up to 1,500 Nm (standard)<\/td>\n<\/tr>\n \nHousing Material<\/td>\n Cast iron or aluminium alloy LM6<\/td>\n<\/tr>\n \nMounting<\/td>\n Flange-mount (B5\/B14) or foot-mount<\/td>\n<\/tr>\n \nShaft Options<\/td>\n Solid keyed; square 1-3\/8″ or 1-3\/4″ PTO adapter<\/td>\n<\/tr>\n \nProtection Rating<\/td>\n IP55 dust\/spray resistant<\/td>\n<\/tr>\n \nSeasonal Storage<\/td>\n Suitable for outdoor storage; drain plug for off-season<\/td>\n<\/tr>\n<\/table>\n<\/div>\nService Factor:<\/strong> Grain augers starting under load (e.g., when restarting a half-filled tube) require a service factor of 1.5\u20132.0. Electric-motor driven augers with direct-on-line starters should use the higher factor to account for the locked-rotor torque at start-up.<\/p>\nStandards & Certification<\/h2>\n
Agricultural worm gear drives are manufactured under ISO 9001:2015<\/strong> quality management, carry CE marking<\/strong> for export markets, and comply with IEC 60072<\/strong> for motor-flange compatibility. For PTO-driven variants, input shaft dimensions follow ASAE S203<\/strong> (1-3\/8″ and 1-3\/4″ 6-spline standards). Housing protection conforms to IP55<\/strong> as a minimum for exposed outdoor agricultural machinery.<\/p>\nCase Studies<\/h2>\n\n\n <\/div>\nWheat Farm \u2014 Moora, WA<\/p>\n
Portable field-to-bin grain auger<\/p>\n
Challenge:<\/strong> Aluminium-cased gearbox failed after one season due to UV degradation of seals and moisture ingress during storage.<\/p>\nSolution:<\/strong> Replaced with UV-resistant FKM seals and sealed drain plug; synthetic oil recommended for off-season storage.<\/p>\nOutcome:<\/strong> No seal failures or moisture ingress across 3 harvest seasons; operator reports easy restart after 8-month winter layup.<\/p>\n<\/div>\n\n <\/div>\nCorn Harvesting Cooperative \u2014 Riverina, NSW<\/p>\n
Header to chaser bin auger<\/p>\n
Challenge:<\/strong> PTO-driven auger gearbox damaged when tractor over-ran rated PTO speed during headland turns.<\/p>\nSolution:<\/strong> Specified higher-ratio gearbox (25:1) and PTO shear bolt \u2014 gearbox now rated for 20% PTO speed overshoot.<\/p>\nOutcome:<\/strong> No further gearbox damage; shear bolt protection provides mechanical overload protection valued by operators.<\/p>\n<\/div>\n\n <\/div>\nCanola Farm \u2014 Esperance, WA<\/p>\n
Storage shed receiving auger<\/p>\n
Challenge:<\/strong> Fine canola seeds passed through standard dust-seal gaps into gear oil, contaminating the lubrication within one season.<\/p>\nSolution:<\/strong> Fitted double-lip contact seals and switched to food-compatible synthetic oil to allow grain contact without contamination.<\/p>\nOutcome:<\/strong> Zero oil contamination detected in 2 full harvest seasons; grain quality certificates unaffected.<\/p>\n<\/div>\n<\/div>\nWhy Farmers Choose Our Gearboxes<\/h2>\n\n\n <\/div>\nHarvest-Ready Every Season<\/strong><\/p>\nUV-stable seals and corrosion-resistant finish survive long outdoor storage between seasons.<\/p>\n<\/div>\n
\n\u26a1<\/div>\nElectric & PTO Compatible<\/strong><\/p>\nFlange-mount electric and square-bore PTO input options \u2014 one gearbox family covers all auger types.<\/p>\n<\/div>\n
\n <\/div>\nDrop-In Replacement<\/strong><\/p>\nStandard dimensional compliance ensures replacement of branded OEM gearboxes without auger modification.<\/p>\n<\/div>\n
\n <\/div>\nWashdown Safe<\/strong><\/p>\nIP55 rating handles rain exposure, morning dew, and grain-shed wash-down.<\/p>\n<\/div>\n
\n <\/div>\nFast Dispatch<\/strong><\/p>\nHarvest-season stock held in Australian distribution \u2014 critical when every hour of harvesting weather counts.<\/p>\n<\/div>\n<\/div>\n
Frequently Asked Questions<\/h2>\n\n▼ What gear ratio should I use for a 540 rpm PTO grain auger?<\/summary>\nFor a typical grain auger target speed of 150\u2013200 rpm, divide PTO speed by target: 540 \u00f7 150 = 3.6 \u2014 so a 4:1 ratio would give ~135 rpm. For 200 rpm: 540 \u00f7 200 = 2.7 \u2014 a 3:1 or 2.5:1 ratio. Most portable grain augers use 3:1 to 7.5:1 PTO ratios depending on auger diameter and target grain throughput.<\/div>\n<\/details>\n\n▼ How do I prepare a grain auger gearbox for winter storage?<\/summary>\nBefore storage: drain old gear oil while warm; refill to mid-level with clean synthetic oil to displace moisture; seal the drain plug and vent. Coat exposed shaft surfaces with anti-rust spray. Store in a dry, covered location if possible. Before the next season: check oil level and condition; inspect seals for cracking; run briefly at no load before engaging grain load.<\/div>\n<\/details>\n\n▼ Can I use food-grade gear oil in a grain auger gearbox?<\/summary>\nYes \u2014 H1-registered food-grade synthetic oils (NSF H1) are suitable and recommended for grain augers where grain contact with gear oil is possible. H1 oils are formulated to be non-toxic in incidental food contact and are approved for use in food processing and grain handling equipment.<\/div>\n<\/details>\n\n▼ What causes grain auger gearboxes to fail prematurely?<\/summary>\nThe most common causes are: over-speed (exceeding rated input rpm); over-loading (choked auger tube requiring start-up against settled grain); moisture ingress during storage (degrading gear oil); and UV seal degradation (seal becomes hard and fails to exclude dust). Most failures are preventable with correct selection and seasonal maintenance.<\/div>\n<\/details>\n\n▼ Are spare parts available for your grain auger gearboxes?<\/summary>\nYes \u2014 worm gear pairs, bearing kits, seal sets, and oil drain plugs are stocked for all current models. For older or discontinued models, we can machine matched worm gear pairs to your dimensions as a service. Contact our parts team with the gearbox model number and year of purchase.<\/div>\n<\/details>\n\nTalk to Our Drive Specialists<\/h2>\n
Get the right worm gear solution for your application \u2014 fast.<\/p>\n
✉ Get in Touch<\/a>🔧 Browse Products<\/a><\/div>","protected":false},"excerpt":{"rendered":"Worm Gearbox for Grain Auger \u2014 Efficient, Weather-Resistant Drive for Agriculture Australia’s grain industry \u2014 from the vast wheat farms of the WA wheatbelt to the sorghum fields of southern Queensland \u2014 relies on auger conveyors to move millions of tonnes of grain from header hoppers to field bins and storage silos every harvest season. […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[9077],"tags":[9079,9084,9081,9082,9083,9080,9078],"class_list":["post-3289","post","type-post","status-publish","format-standard","hentry","category-agriculture","tag-agricultural-worm-reducer","tag-auger-conveyor-gearbox","tag-compact-worm-gearbox-grain-handling","tag-worm-drive-reducer-pto","tag-worm-gear-reducer-agriculture","tag-worm-gear-unit-farm-auger","tag-worm-gearbox-grain-auger"],"_links":{"self":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts\/3289","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/comments?post=3289"}],"version-history":[{"count":0,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts\/3289\/revisions"}],"wp:attachment":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/media?parent=3289"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/categories?post=3289"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/tags?post=3289"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
| Parameter<\/th>\n | Value<\/th>\n<\/tr>\n |
|---|---|
| Gear Ratio<\/td>\n | 7.5:1 \u2013 60:1<\/td>\n<\/tr>\n |
| Input Speed<\/td>\n | 540 rpm (PTO) or 1,450 rpm (electric motor)<\/td>\n<\/tr>\n |
| Typical Auger Speed<\/td>\n | 80 \u2013 200 rpm<\/td>\n<\/tr>\n |
| Output Torque<\/td>\n | Up to 1,500 Nm (standard)<\/td>\n<\/tr>\n |
| Housing Material<\/td>\n | Cast iron or aluminium alloy LM6<\/td>\n<\/tr>\n |
| Mounting<\/td>\n | Flange-mount (B5\/B14) or foot-mount<\/td>\n<\/tr>\n |
| Shaft Options<\/td>\n | Solid keyed; square 1-3\/8″ or 1-3\/4″ PTO adapter<\/td>\n<\/tr>\n |
| Protection Rating<\/td>\n | IP55 dust\/spray resistant<\/td>\n<\/tr>\n |
| Seasonal Storage<\/td>\n | Suitable for outdoor storage; drain plug for off-season<\/td>\n<\/tr>\n<\/table>\n<\/div>\n Service Factor:<\/strong> Grain augers starting under load (e.g., when restarting a half-filled tube) require a service factor of 1.5\u20132.0. Electric-motor driven augers with direct-on-line starters should use the higher factor to account for the locked-rotor torque at start-up.<\/p>\n Agricultural worm gear drives are manufactured under ISO 9001:2015<\/strong> quality management, carry CE marking<\/strong> for export markets, and comply with IEC 60072<\/strong> for motor-flange compatibility. For PTO-driven variants, input shaft dimensions follow ASAE S203<\/strong> (1-3\/8″ and 1-3\/4″ 6-spline standards). Housing protection conforms to IP55<\/strong> as a minimum for exposed outdoor agricultural machinery.<\/p>\n Wheat Farm \u2014 Moora, WA<\/p>\n Portable field-to-bin grain auger<\/p>\n Challenge:<\/strong> Aluminium-cased gearbox failed after one season due to UV degradation of seals and moisture ingress during storage.<\/p>\n Solution:<\/strong> Replaced with UV-resistant FKM seals and sealed drain plug; synthetic oil recommended for off-season storage.<\/p>\n Outcome:<\/strong> No seal failures or moisture ingress across 3 harvest seasons; operator reports easy restart after 8-month winter layup.<\/p>\n<\/div>\n Corn Harvesting Cooperative \u2014 Riverina, NSW<\/p>\n Header to chaser bin auger<\/p>\n Challenge:<\/strong> PTO-driven auger gearbox damaged when tractor over-ran rated PTO speed during headland turns.<\/p>\n Solution:<\/strong> Specified higher-ratio gearbox (25:1) and PTO shear bolt \u2014 gearbox now rated for 20% PTO speed overshoot.<\/p>\n Outcome:<\/strong> No further gearbox damage; shear bolt protection provides mechanical overload protection valued by operators.<\/p>\n<\/div>\n Canola Farm \u2014 Esperance, WA<\/p>\n Storage shed receiving auger<\/p>\n Challenge:<\/strong> Fine canola seeds passed through standard dust-seal gaps into gear oil, contaminating the lubrication within one season.<\/p>\n Solution:<\/strong> Fitted double-lip contact seals and switched to food-compatible synthetic oil to allow grain contact without contamination.<\/p>\n Outcome:<\/strong> Zero oil contamination detected in 2 full harvest seasons; grain quality certificates unaffected.<\/p>\n<\/div>\n<\/div>\n Harvest-Ready Every Season<\/strong><\/p>\n UV-stable seals and corrosion-resistant finish survive long outdoor storage between seasons.<\/p>\n<\/div>\n Electric & PTO Compatible<\/strong><\/p>\n Flange-mount electric and square-bore PTO input options \u2014 one gearbox family covers all auger types.<\/p>\n<\/div>\n Drop-In Replacement<\/strong><\/p>\n Standard dimensional compliance ensures replacement of branded OEM gearboxes without auger modification.<\/p>\n<\/div>\n Washdown Safe<\/strong><\/p>\n IP55 rating handles rain exposure, morning dew, and grain-shed wash-down.<\/p>\n<\/div>\n Fast Dispatch<\/strong><\/p>\n Harvest-season stock held in Australian distribution \u2014 critical when every hour of harvesting weather counts.<\/p>\n<\/div>\n<\/div>\n Get the right worm gear solution for your application \u2014 fast.<\/p>\n ✉ Get in Touch<\/a>🔧 Browse Products<\/a><\/div>","protected":false},"excerpt":{"rendered":" Worm Gearbox for Grain Auger \u2014 Efficient, Weather-Resistant Drive for Agriculture Australia’s grain industry \u2014 from the vast wheat farms of the WA wheatbelt to the sorghum fields of southern Queensland \u2014 relies on auger conveyors to move millions of tonnes of grain from header hoppers to field bins and storage silos every harvest season. […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[9077],"tags":[9079,9084,9081,9082,9083,9080,9078],"class_list":["post-3289","post","type-post","status-publish","format-standard","hentry","category-agriculture","tag-agricultural-worm-reducer","tag-auger-conveyor-gearbox","tag-compact-worm-gearbox-grain-handling","tag-worm-drive-reducer-pto","tag-worm-gear-reducer-agriculture","tag-worm-gear-unit-farm-auger","tag-worm-gearbox-grain-auger"],"_links":{"self":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts\/3289","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/comments?post=3289"}],"version-history":[{"count":0,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/posts\/3289\/revisions"}],"wp:attachment":[{"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/media?parent=3289"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/categories?post=3289"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gearboxesworm.xyz\/vi\/wp-json\/wp\/v2\/tags?post=3289"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |