We – EPG Team the greatest worm gearbox, couplings and gears factory in China with five various branches. For far more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /
Machining of the gearbox To make a worm gearbox, very first just take a blank of an alloy. A bronze bearing is manufactured in the middle of the blank. The hobbing cutter is then used to lessen the diameter of the blank relative to the completed height of the tooth idea on the equipment wheel, so the depth of the lower wants to be added to the blank’s diameter. The necessary threading tool is grind to lower the worm. The side clearance on the left-hand aspect of the cutter idea is authorized for the worm’s pitch angle. The greatest complete is set on the cutting device utilizing a slip stone. Equipment blank is then mounted on a turntable that functions as a bearing support. This bearing help is mounted on the rear of the lathe cross-slide with the hobbing cutter mounted between the facilities. The two worms are then machined, out of which one is produced the cutter and last but not least the cutter is utilised to device the worm equipment. the worm gear screw is tightened to 3 n.m Our worm gearbox dimensions merchandise are manufactured by modern day computerized machinery and tools.a specialized supplier of a entire assortment of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes…. Product INTRODUCTION:
Major Functions:
one) Made of high high quality aluminum alloy, mild fat and non-rusting
two) Huge output torque and substantial radiating performance 3) Smooth operating and reduced sounds, can operate extended time in dreadful condition
4) Excellent-hunting physical appearance, resilient services lifestyle and modest quantity
five) Appropriate for omnibearing installation
Major Supplies:
1)housing: aluminium alloy ADC12(size 025-090) die cast iron HT200(size 110-one hundred fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher warmth treatment make gear surface hardness up to 56-62 HRC Right after precision grinding, carburization layer’s thickness amongst .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Product PARAMETERS:
Size | Specification | transmission ratio | |||||||||||||
IEC | N | M | P | seven.five | 10 | fifteen | twenty | twenty five | thirty | 40 | fifty | sixty | eighty | one hundred | |
D | |||||||||||||||
25 | 56B14 | fifty | sixty five | eighty | nine | nine | nine | 9 | nine | nine | nine | 9 | 9 | ||
thirty | 63B5 | ninety five | a hundred and fifteen | a hundred and forty | 11 | 11 | 11 | eleven | 11 | 11 | eleven | eleven | |||
63B14 | 60 | 75 | 90 | ||||||||||||
56B5 | eighty | one hundred | a hundred and twenty | 9 | nine | 9 | nine | nine | nine | nine | nine | 9 | nine | ||
56B14 | 50 | 65 | eighty | 9 | nine | nine | 9 | nine | nine | nine | 9 | 9 | nine | ||
forty | 71B5 | a hundred and ten | a hundred thirty | one hundred sixty | 14 | fourteen | 14 | fourteen | 14 | fourteen | 14 | 14 | |||
71B14 | 70 | eighty five | a hundred and five | ||||||||||||
63B5 | 95 | 115 | 140 | 11 | eleven | 11 | eleven | eleven | eleven | 11 | eleven | 11 | eleven | eleven | |
63B14 | sixty | 75 | ninety | ||||||||||||
56B5 | eighty | one hundred | one hundred twenty | 9 | 9 | 9 | nine | ||||||||
fifty | 80B5 | one hundred thirty | 165 | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | – | – | – |
80B14 | eighty | a hundred | 120 | ||||||||||||
71B5 | 110 | one hundred thirty | 160 | 14 | 14 | 14 | 14 | 14 | fourteen | 14 | 14 | 14 | fourteen | – | |
71B14 | 70 | 85 | a hundred and five | ||||||||||||
63B5 | 95 | a hundred and fifteen | one hundred forty | – | – | – | – | – | – | – | eleven | eleven | 11 | 11 | |
63 | 90B5 | 130 | one hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | – | – | – |
90B14 | ninety five | 115 | a hundred and forty | ||||||||||||
80B5 | a hundred thirty | a hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | |
80B14 | 80 | one hundred | a hundred and twenty | ||||||||||||
71B5 | a hundred and ten | 130 | a hundred and sixty | – | – | – | – | – | – | 14 | 14 | fourteen | fourteen | 14 | |
71B14 | 70 | 85 | one zero five | ||||||||||||
seventy five | a hundred/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | – | – | – | – | – | – | – | – |
one hundred/112B14 | one hundred ten | a hundred thirty | one hundred sixty | ||||||||||||
90B5 | one hundred thirty | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||||
90B14 | ninety five | one hundred fifteen | one hundred forty | ||||||||||||
80B5 | 130 | one hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | ||||
80B14 | 80 | a hundred | one hundred twenty | ||||||||||||
71B5 | one hundred ten | one hundred thirty | 160 | 14 | fourteen | fourteen | 14 | ||||||||
ninety | 100/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | – | – | – | – | – |
a hundred/112B14 | 110 | one hundred thirty | a hundred and sixty | ||||||||||||
90B5 | one hundred thirty | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||
90B14 | ninety five | 115 | 140 | ||||||||||||
80B5 | a hundred thirty | one hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | |||||||
80B14 | 80 | one hundred | a hundred and twenty | ||||||||||||
a hundred and ten | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | – | – | – | ||||
100/112B5 | a hundred and eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||
one hundred/112B14 | one hundred ten | a hundred thirty | a hundred and sixty | ||||||||||||
90B5 | a hundred thirty | a hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | |||||
80B5 | 130 | 165 | 200 | 19 | 19 | ||||||||||
130 | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | 38 | 38 | 38 | – | – | – | |
100/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||||
a hundred/112B14 | a hundred and ten | one hundred thirty | one hundred sixty | ||||||||||||
90B5 | one hundred thirty | one hundred sixty five | 200 | 24 | 24 | ||||||||||
one hundred fifty | 160B5 | 250 | 300 | 350 | forty two | 42 | forty two | 42 | forty two | – | – | – | – | – | – |
132B5 | 230 | 265 | three hundred | 38 | 38 | 38 | 38 | 38 | 38 | ||||||
100/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 |
Product Define Dimensions:
Firm Short INTRODUCTION:
We are a professional reducer producer found in Taizhou, Zhejiang province.
Our major items is full assortment of RV025-150 worm reducers , also equipped hypoid helical gearbox, Laptop models, UDL Variators and AC Motors.
Items are extensively utilised for applications these kinds of as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-making, construction equipment, metallurgic mine, environmental safety engineering, and all types of automatic lines, and assembly lines.
With quick shipping, exceptional soon after-product sales provider, innovative generating facility, our merchandise offer well both at residence and overseas. We have exported our reducers to Southeast Asia, Jap Europe and the Middle East and so on.Our aim is to build and innovate on the foundation of substantial top quality, and create a good track record for reducers.
WORKSHOP:
EXHIBITIONS:
FAQ:
one.Q:Can you make as per customer drawing?
A: Yes, we offer you personalized service for customers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your conditions of payment ?
A: thirty% deposit ahead of production,balance T/T before supply.
three.Q:Are you a trading organization or producer?
A:We are a manufacurer with sophisticated equipment and seasoned workers.
four.Q:What is actually your manufacturing potential?
A:8000-9000 PCS/Month
4.Q:What is your MOQ?
A: 1 pcs
five.Q:Cost-free sample is offered or not?
A:Of course, we can source free sample if customer concur to pay for the courier value
6.Q:Do you have any certificate?
A:Indeed, we have CE certification and SGS certification report.
Contact data:
Ms Lingel Pan
For any inquiries just come to feel cost-free ton contact me. A lot of many thanks for your variety consideration to our business!
/ The use of authentic tools manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the outlined substitution areas contained herein are not sponsored, accepted, or manufactured by the OEM. /