Product Description
S Series Worm Gear Hollow Shaft Gear Reducer/Gear Motor/Motor Reducer/gear units/gearbox
< ABOUT TILI
Technical data
| Product Name | S Series Worm Gear Hollow Shaft Gear Reducer/Gear Motor/Motor Reducer/gear units/gearbox |
| Power | 0.12KW~30KW |
| Nominal output torque | 9~ 8425N · m |
| Output speed | 0.1 ~ 374r/min |
| Gear material | 20CrMnTi alloy steel |
| Gear Processing | Grinding finish by HOFLER Grinding Machines |
| Noise Test | Below 65dB |
| Brand of bearings | C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc |
| Brand of oil seal | NAK or other brand |
| Temp. rise (MAX) | 40ºC |
| Temp. rise (Oil)(MAX | 50ºC |
| Vibration | ≤20µm |
| Housing hardness | HBS190-240 |
| Surface hardness of gears | HRC58°~62 ° |
| Gear core hardness | HRC33~40 |
| Machining precision of gears | 5 Grade |
| Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
| Heat treatment | Carburizing, Quenching etc |
| Efficiency | 95%~96% (depends on the transmission stage) |
| Bearing output mode | Parallel output |
| Installation type and output mode | Bottom seated type flange type installation, solid,hollow shaft output. |
| Input mode | Direct motor, shaft input and connecting flange input |
| Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Installation Instructions
Company Profile
< WORKSHOP
< QUALITY CONTROL
Certifications
Packaging & Shipping
FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.
Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.
Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.
Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements
Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Vertical Output |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Is it Possible to Reverse the Direction of a Worm Gearbox?
Yes, it is possible to reverse the direction of a worm gearbox by changing the orientation of either the input or output shaft. However, reversing the direction of a worm gearbox can have some implications that need to be considered:
- Efficiency: Reversing the direction of a worm gearbox can potentially affect its efficiency. Worm gearboxes are typically more efficient in one direction of rotation due to the design of the worm and worm wheel.
- Backlash: Reversing the direction of rotation might lead to increased backlash or play in the gearbox, which can impact precision and smooth operation.
- Lubrication: Depending on the gearbox’s design, reversing the direction could affect lubrication distribution and lead to uneven wear on the gear teeth.
- Load: Reversing the direction might also impact the gearbox’s load-carrying capacity, especially if it’s designed for predominantly one-way operation.
- Noise and Vibration: Direction reversal can sometimes result in increased noise and vibration due to changes in gear engagement and meshing behavior.
If you need to reverse the direction of a worm gearbox, it’s advisable to consult the gearbox manufacturer’s guidelines and recommendations. They can provide insights into whether the specific gearbox model is suitable for reversible operation and any precautions or adjustments needed to ensure proper functioning.
Diagnosing and Fixing Oil Leakage in a Worm Gearbox
Oil leakage in a worm gearbox can lead to reduced lubrication, increased friction, and potential damage to the gearbox components. Here’s a step-by-step process to diagnose and fix oil leakage:
- Inspect the Gearbox: Perform a visual inspection of the gearbox to identify the source of the leakage. Check for oil stains, wet spots, or oil pooling around the gearbox.
- Check Seals and Gaskets: Inspect the seals, gaskets, and O-rings for any signs of wear, cracks, or damage. These components are common points of leakage.
- Tighten Bolts and Fasteners: Ensure that all bolts, screws, and fasteners are properly tightened. Loose fasteners can create gaps that allow oil to escape.
- Replace Damaged Seals: If you find damaged seals or gaskets, replace them with new ones. Use seals that are compatible with the operating conditions and lubricant.
- Check Breather Vent: A clogged or malfunctioning breather vent can cause pressure buildup inside the gearbox, leading to leakage. Clean or replace the breather vent if necessary.
- Examine Shaft Seals: Check the shaft seals for wear or damage. If they’re worn out, replace them with seals of the appropriate size and material.
- Use Proper Lubricant: Ensure that you’re using the correct lubricant recommended for the gearbox. Using the wrong type of lubricant can cause leaks.
- Apply Sealants: In some cases, applying a suitable sealant to the joints and connections can help prevent leaks. Follow the manufacturer’s instructions for proper application.
- Monitor Leakage: After addressing the issues, monitor the gearbox for any signs of continued leakage. If leakage persists, further investigation may be required.
- Regular Maintenance: Implement a regular maintenance schedule that includes checking seals, gaskets, and other potential leakage points. Timely maintenance can prevent future leakage issues.
If you’re unsure about diagnosing or fixing oil leakage in a worm gearbox, consider consulting with a professional or gearbox manufacturer to ensure proper resolution.
Lubrication Requirements for a Worm Gearbox
Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:
- Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
- Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
- Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
- Lubrication Points: Identify all the lubrication points on the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
- Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
- Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
- Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.
Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.
editor by CX 2024-04-03
China best Helical Worm Gear Reducer /Gear Motor/Motor Reducer/Gear Units/Gearbox with CZPT Shaft cvt gearbox
Product Description
Helical Worm Gear Reducer /Gear Motor/Motor Reducer/gear units/gearbox with CHINAMFG Shaft
< ABOUT TILI
Technical data
| Product Name | Helical Worm Gear Reducer /Gear Motor/Motor Reducer/gear units/gearbox with CHINAMFG Shaft |
| Power | 0.12KW~30KW |
| Nominal output torque | 9~ 8425N · m |
| Output speed | 0.1 ~ 374r/min |
| Gear material | 20CrMnTi alloy steel |
| Gear Processing | Grinding finish by HOFLER Grinding Machines |
| Noise Test | Below 65dB |
| Brand of bearings | C&U bearing, ZWZ, LYC, HRB, CHINAMFG , etc |
| Brand of oil seal | NAK or other brand |
| Temp. rise (MAX) | 40ºC |
| Temp. rise (Oil)(MAX | 50ºC |
| Vibration | ≤20µm |
| Housing hardness | HBS190-240 |
| Surface hardness of gears | HRC58°~62 ° |
| Gear core hardness | HRC33~40 |
| Machining precision of gears | 5 Grade |
| Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
| Heat treatment | Carburizing, Quenching etc |
| Efficiency | 95%~96% (depends on the transmission stage) |
| Bearing output mode | Parallel output |
| Installation type and output mode | Bottom seated type flange type installation, solid,hollow shaft output. |
| Input mode | Direct motor, shaft input and connecting flange input |
| Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Installation Instructions
Company Profile
< WORKSHOP
< QUALITY CONTROL
Certifications
Packaging & Shipping
FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.
Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.
Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.
Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements
Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Vertical Output |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Self-Locking Properties in a Worm Gearbox
Yes, worm gearboxes exhibit self-locking properties, which can be advantageous in certain applications. Self-locking refers to the ability of a mechanism to prevent the transmission of motion from the output shaft back to the input shaft when the system is at rest. Worm gearboxes inherently possess self-locking properties due to the unique design of the worm gear and worm wheel.
The self-locking behavior arises from the angle of the helix on the worm shaft. In a properly designed worm gearbox, the helix angle of the worm is such that it creates a mechanical advantage that resists reverse motion. When the gearbox is not actively driven, the friction between the worm threads and the worm wheel teeth creates a locking effect.
This self-locking feature makes worm gearboxes particularly useful in applications where holding a load in position without external power is necessary. For instance, they are commonly used in situations where there’s a need to prevent a mechanism from backdriving, such as in conveyor systems, hoists, and jacks.
However, it’s important to note that while self-locking properties can be beneficial, they also introduce some challenges. The high friction between the worm gear and worm wheel during self-locking can lead to higher wear and heat generation. Additionally, the self-locking effect can reduce the efficiency of the gearbox when it’s actively transmitting motion.
When considering the use of a worm gearbox for a specific application, it’s crucial to carefully analyze the balance between self-locking capabilities and other performance factors to ensure optimal operation.
Materials Used for Worm Gears
Worm gears are manufactured using a variety of materials to meet different application requirements. Some commonly used materials for worm gears include:
- Steel: Steel is a popular choice for worm gears due to its strength, durability, and wear resistance. It can handle heavy loads and is often used in industrial applications.
- Bronze: Bronze offers good lubricity and is commonly used for the worm gear (worm) component. It provides effective wear resistance and works well in applications where quiet operation is essential.
- Cast Iron: Cast iron is known for its high strength and durability. It’s often used for worm gears in applications where shock loads or heavy-duty conditions are expected.
- Aluminum: Aluminum worm gears are lightweight and corrosion-resistant, making them suitable for applications where weight reduction is important.
- Plastic: Some worm gears are made from plastic materials such as nylon or acetal. These materials are often chosen for their self-lubricating properties and quiet operation.
- Composite Materials: Composite materials can offer a combination of properties, such as lightweight construction and corrosion resistance. They can be suitable for specific applications.
The choice of material depends on factors such as the application’s load, speed, operating environment, and required performance characteristics. It’s important to consider these factors when selecting the appropriate material for worm gears to ensure optimal performance and longevity.
What Industries Commonly Use Worm Reducers?
Worm reducers are versatile mechanical components that find applications in various industries due to their unique advantages and capabilities. Some of the industries that commonly use worm reducers include:
- Material Handling: Worm reducers are widely used in material handling equipment such as conveyors, bucket elevators, and cranes to control movement and manage heavy loads.
- Automotive: They are utilized in automotive manufacturing processes, assembly lines, and vehicle positioning systems.
- Food and Beverage: Worm reducers are used in food processing and packaging machinery where hygiene and cleanliness are crucial.
- Agriculture: Agricultural equipment like irrigation systems and tractors use worm reducers for controlling rotational motion.
- Mining and Construction: Heavy-duty applications in mining equipment, excavators, and construction machinery benefit from the torque multiplication provided by worm reducers.
- Energy: Wind turbines and solar tracking systems use worm reducers to convert low-speed, high-torque motion into rotational energy.
- Textile: Textile machinery employs worm reducers for controlling speed and tension in weaving and spinning operations.
- Packaging: Packaging equipment relies on worm reducers for precise movement and positioning of packaging materials.
- Medical: Medical devices and equipment often utilize worm reducers for their accuracy and controlled motion.
- Printing: Printing machines use worm reducers to regulate paper feed and ensure consistent printing quality.
Worm reducers’ ability to provide high torque output, compact design, and self-locking characteristics makes them suitable for applications requiring reliable and controlled motion across various industries.
editor by CX 2024-04-02
China 24V 90W 14mm Output Shaft Brushed DC Worm Gear Motor with 30RV Gearbox gearbox worm box
Error:获取session失败，
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by Cx 2023-04-27
China ND Cast Iron Housing High Rpm Helical Increasing Gear Boxes with Long Shaft (B215+) brushless dc motor worm gearbox
Item Description
Product Description
Company Profile
In 2571, HangZhou CZPT Machinery Co.,ltd was set up by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou Metropolis, ZHangZhoug province, China, all 3 Founders are engineers who have a lot more than averaged thirty many years of expertise.
We, CZPT machinery recognized a full good quality administration program and revenue services network to provide clientele with large-good quality items and satisfactory provider. Our goods are bought in 36 nations and areas in the entire world, our primary industry is the European industry.
Manufacturing unit & Workshop
Expert
thirty years encounter engineman. R&D place of work, Examination laboratory, CNC lathe workshop operated by experts.
Responsible
two~10years guarantee. Perspective decides every thing, details determine achievement or failure. We are accountable for your goods.
Scientific management
one hundred% tested. Strict business technique and scientific content administration will reduce the error fee.
Certifications
We are functioning on research and producing all types of gearbox reducer and mechanical elements these 11 a long time, and have obtained certificates like ISO9001, a lot of Gearbox Patents, SGS, BV, and so forth.
Packaging & Shipping and delivery
Sample Place
Via our CZPT manufacturer ND, CZPT Machinery delivers agricultural options to agriculture equipment manufacturer and distributors CZPT through a total line of spiral bevel / straight bevel / spur gearboxes, generate shafts, sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and so forth. Goods can be customized as request.
FAQ
Q: Are you trading business or producer ?
A: We are just a manufacturing facility.
Q: Do you offer samples ? is it free or added ?
A: Indeed, we could offer the sample for free of charge demand but do not spend the cost of freight.
Q: How extended is your shipping time ? What is your terms of payment ?
A: Usually it is 40-45 days. The time might range depending on the product and the level of customization. For regular goods, the payment is: 30% T/T in progress, equilibrium ahead of shippment.
Q: What is the actual MOQ or price for your item ?
A: As an OEM company, we can supply and adapt our merchandise to a broad range of wants.Hence, MOQ and price may significantly vary with measurement, material and further technical specs For instance, expensive merchandise or normal products will usually have a reduced MOQ. You should contact us with all appropriate details to get the most exact quotation.
If you have another question, please really feel free of charge to speak to us.
|
/ Piece | |
50 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery, Industrial, etc |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Shaft T or L Type |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
###
| Customization: |
|---|
|
/ Piece | |
50 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery, Industrial, etc |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Shaft T or L Type |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
###
| Customization: |
|---|
What is a worm gear reducer gearbox?
A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer gearbox
The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer gearbox
Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by CX 2023-04-17
China Helical Gearbox Inline Helical Gear Box Bevel Worm Reduction Shaft Mounted Parallel Manufacturers Industrial Coaxial Two Stage Unit Crane Duty Helical Gearbox gearbox worm box
Item Description
Helical Gearbox inline helical equipment box bevel worm reduction Shaft Mounted parallel companies industrial coaxial 2 stage unit crane duty Helical Gearbox
helical concentric gearbox velocity reducer decelerator has the characteristics of large flexibility,very good blend and hefty loading ability, along with other merits these kinds of as easy to attain different transmission ratios, large efficiency, minimal vibrationand high permissible axis radial load. This series can not only be merged with numerous varieties of reducers and variators and satisfy the requirements, but also beadvantage of localization of associated transmission gear.
one) Output pace: .6~1,571rpm
two) Output torque: up to eighteen,000N.m
3) Motor energy: .18~160kW
four) Mounted sort: foot-mounted and flange-mounted mounting
| Merchandise Title | SLR Sequence Rigid Tooth helical reducer |
| Gear Materials | 20CrMnTi |
| Scenario Substance | HT250 |
| Shaft Material | 20CrMnTi |
| Gear Processing | Grinding finish by HOFLER Grinding Equipment |
| Color | Custom-made |
| Noise Check | Bellow 65dB |
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery |
|---|---|
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Output Torque: | 800~100000n.M |
| Output Speed: | 14-280rpm |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
###
| Product Name | SLR Series Rigid Tooth helical reducer |
| Gear Material | 20CrMnTi |
| Case Material | HT250 |
| Shaft Material | 20CrMnTi |
| Gear Processing | Grinding finish by HOFLER Grinding Machines |
| Color | Customized |
| Noise Test | Bellow 65dB |
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery |
|---|---|
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Output Torque: | 800~100000n.M |
| Output Speed: | 14-280rpm |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
###
| Product Name | SLR Series Rigid Tooth helical reducer |
| Gear Material | 20CrMnTi |
| Case Material | HT250 |
| Shaft Material | 20CrMnTi |
| Gear Processing | Grinding finish by HOFLER Grinding Machines |
| Color | Customized |
| Noise Test | Bellow 65dB |
Worm gear reducer gearbox
Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.
high efficiency
High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
low clearance
A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.
quieter
The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
easy to replace
An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.
editor by czh 2022-12-18
China Custom Stainless Steel Gear Shaft Brass Gears with Setscrew Allen Key compact worm gearbox
Issue: New
Guarantee: 3 months
Shape: Worm
Applicable Industries: Building Content Outlets, Manufacturing Plant, Equipment Mend Stores, Farms, Printing Outlets, Design works , Energy & Mining
Excess weight (KG): .3
Soon after Guarantee Services: On the web assistance
Neighborhood Service Location: None
Showroom Spot: None
Movie outgoing-inspection: Presented
Equipment Test Report: Presented
Advertising Sort: New Item 2571
Warranty of main components: 3 months
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Force vessel, Gear, Pump
Content: Metal
Normal or Nonstandard: Nonstandard
Course: Right
Processing: Die Casting/Hobbing
Coloration: Customzied
Dimensions: Customer’s Requst
MOQ: one hundred Pcs
Certification: ISO9001:2015
Support: OEM ODM
Item: CNC Precision Machining Components
Good quality: Strictly Control
Packing: Carton
Software: Mechanical Products
Packaging Specifics: Poly Bag, Small Box, Carton, or in accordance to customers requirementsCustom Stainless Metal Equipment Shaft Brass Gears with Setscrew Allen Essential
Port: ShenZhen
| Product Identify | Custom Stainless Metal Gear Shaft Brass Gears with Setscrew Allen Key | ||||||
| Material | 1)Metal:Stainless metal,Steel(Iron,)Brass,Copper,Aluminum2)Plastic:POM,Nylon,Stomach muscles,PP3)OEM in accordance to your ask for | ||||||
| Surface remedy | Anodized different colour,Mini sharpening&brushing,Electronplating(zinc plated,nickel plated,chrome plated),Power coating&PVDcoating,Laser marking&Silk display,Printing,Welding,Harden etc. | ||||||
| Tolerance | ±0.01mm | ||||||
| process | Machining | ||||||
| Certificate | ISO9001:2015,SGS, ROHS,ISO9001:2015 | ||||||
| Size | According to your drawing(stp,dwg,igs,pdf),or sample,supply customized provider | ||||||
| Spur Gear | Helical Gear | Bevel Gear |
| Worm Equipment | Planetary Gear | Gearbox |
The Customer testimonials FAQ Q: Are you buying and selling firm or maker ?A: We are manufacturing unit.Q: How can I get the quotation?A: You should deliver us details for quote: drawing, substance, weight, quantity and ask for,w can settle for PDF, IGS, DWG, Phase file format.If you never have drawing, remember to ship the sample to us,we can quote dependent on your sample way too.Q: What is actually your MOQ?In standard a thousand pcs,but can accept minimal amount in some specific conditions.Q: Do you supply samples ? is it free or further ?A: Of course, we could supply the sample for totally free demand but do not pay out the price of freight.Q: What about the leading time for mass creation?A: Actually, it relies upon on the order quantity. Normally, fifteen times to twenty days right after your deposit if no tooling needed.Q: What if the parts are not great?A:We can ensure very good top quality,but if took place,you should make contact with us quickly, just take some images, we will check on the problem,and fix it asap.Q: What is your conditions of payment ?A: Payment=1000 USD, thirty% T/T in progress ,equilibrium just before cargoPersonalized Sheet Metallic Components laser Cut Steel Elements Personalized Sheet Steel Areas laser Minimize Metal Parts Customized Sheet Metal Elements laser Cut Metallic Areas
Worm gear reducer
A worm gear reducer is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer. A worm gear reducer with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducers have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducers is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducers, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducers are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducers can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducers are the most popular type of reducer. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer is a popular type of reducer. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer in multiple installation locations.
Another application for worm gear reducers is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer is determined by several factors. Size and material are important. Worm gear reducers can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducers with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by czh
in Incheon Republic of Korea sales price shop near me near me shop factory supplier China Shaft or Flange Input Wp Gear Reducer Worm Gearbox manufacturer best Cost Custom Cheap wholesaler
Owing to our vast item selection and wealthy ordeals in this business, In this way, our goods have continued to achieve industry acceptance and consumers satisfaction over the previous number of a long time. Advanced thermo remedy tools, this sort of as network warmth remedy oven, multi-use thermo remedy oven, and so forth.
EPTT Prime EPTT WP Equipment EPTT Worm EPTT
Specification
\
Thorough Images
Firm Overview
1. AC EPTT motor
2. DC amp BLDC EPTT motor
3. Worm EPTT
four. Helical EPTT
5. Coreless motor
6. PM Synchronous EPTT
seven. EPTT controller
eight. Tailored motor
If you are searching for motors and EPTTes, remember to explain to us about your need. We feel we will supply a ideal EPTT resolution for you.
Organization Overview
Certificates
About EPT EPTT
Heritage: EPT is a mechanical brand of EPT EPTT Co., Ltd. With over ten years’
mechanical producing ordeals, EPT EPTT alwaEPTTstrictly stands on the
theory of Best Consumer Fulfillment.
Good quality: EPTT Inspection, Manufacturing Control, Completed Items Take a look at, Pre-dellivery Inspection
MISSION: quotOnce and without end quot is our objective to provide buyers in the globe. As soon as we do
enterprise with buyer, we will do organization eternally.
Market place: 30 diverse nations around the world, mainly Germany, Austria, Japan, United states and Middle-EPTT.
Supply: 100% on-time shipping Assured.
Providers: Quickly reaction in EPTT, German, Japanese and EPTT languages.
OEM: Personalized orders are welcome at EPT EPTT.
EPTTs
FAQ
one Q: What is your MOQ for Worm EPTT?
A: 1unit is alright for diverse sorts.
2 Q: What about your guarantee for your Worm EPTT?
A: 1 calendar year.
3 Q: Do you give OEM provider with buyer-brand?
A: Yes, we could do OEM orders, but we mainly target on our personal model.
four Q: How about your payment terms ?
A: TT, western union and paypal. a hundred% payment EPTTd for orders significantly less $five,000. thirty% deposit and equilibrium ahead of delivery for orders over $five,000.
five Q: How about your EPTT ?
A: Carton, Plywood scenario. If you want more, we can pack all items with pallet
six Q: What details should be given, if I get Worm EPTT from you ?
A: Rated EPTT, EPTT ratio, input velocity, mounting position. Much more details, far better!
seven Q: How do you produce the Worm EPTT?
A: We will assess and decide on the most suited waEPTTof shipping by sea, air or convey courier.
We hope you will enEPTT cooperating with us.
in Lima Peru sales price shop near me near me shop factory supplier Wpo Worm Shaft Reducer Wpo Worm Gear Reduction Gearbox manufacturer best Cost Custom Cheap wholesaler
we are self-assured to give our clients versatile and diversified solutions. Meanwhile, our goods are produced in accordance to substantial top quality expectations, and complying with the global superior common requirements. We will give best providers and high quality items with all sincerity.
gt Product Introduction
Wpw Worm Worm Reductor
one, WP sequence worm EPT ‘s the EPT clean, vibration, EPT and sounds are modest, a large reduction ratio, extensive versaEPTty, with all varieties of mechanical products.
2, WPA sequence pace EPT are in a position to acquire a larger one-stage EPT EPT ratio, compact, most models have better EPT self-locking, braking requirements for mechanical products can preserve brakes
3, worm thread engagement with the worm EPT tooth surface friction reduction higher than the EPT EPT effectiveness and as a result lower, easy to heat and greater temperatures.
four, interworking good worm created in accordance to nationwide stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds, bearings, seals etc with stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd elements. 5,
5, box variety simple variety (vertical or horizontal box for two constructions with base foot) and the EPT variety (box is rectangular, multi-faceted with fastened screw, not equipped with bottom foot or the other end foot and other structural variety)
six, WP sequence EPT box input shaft coupling approaches are the simple kind (one input shaft and twin input shaft), two motor with flange.
seven, WP sequence EPT ‘ output, situation and route of the enter shaft and the enter shaft on the following the output aXiHu (West Lake) Dis.s and down the enter shaft and down.
eight, WP collection worm EPT can be 2 or 3 sets consisting of multi stage EPT EPT to get excellent EPT ratio.
| Kind: | WP EPTs reduction EPT |
| Design: | WPA40-250 |
| Ratio: | 10,15,twenty,twenty five,30,forty,fifty,sixty |
| Color: | Eco-friendly,Brown |
| EPT: | Forged iron physique |
| Worm Gear- Cooper-ten-3 # | |
| Worm-20CrMnTi with carburizing and quenching, area hardness is fifty six-62HRC | |
| Shaft-chromium steel-forty five# | |
| EPT: | Paper Carton,Plywood box / for each established(With foam board inside of) |
| Guarantee: | 1 12 months |
| Input EPT: | .55kw,.75kw,1.1kw,1.5kw,2.2kw,4kw,5.5kw,7.5kw |
| Usages: | In EPT EPT: Foods things,Ceramics,chemical, aswell as EPT, printing, dyeing,woodworking, EPT and plastics #8230.. |
| IEC Flange: | 80B5,90B5,100B5,112B5,132B5…. |
| Lubricant: | Artificial amp Mineral |
gt Catalogue
gt Our EPT Rewards
one. Sensible price tag with excellent quality
two.Every a single tests meticulously
3.Clear nameplate
four.Dependable package
5.High effectiveness, smooth runingand lower noise
6.Very best resources make best performance
gt Creating Procedure
gt WORKSHOP Tools:
CERTIFICATION :
gt EPTAGE :
for 1 container, right loading ,for significantly less, all merchandise with pallet,
FAQ
FAQ
one, Q:what is your MOQ for ac EPT motor ?
A: 1pc is okay for every variety electric EPT box motor
2, Q: What about your warranty for your induction speed EPT motor ?
A: one particular calendar year ,but apart from gentleman-manufactured wrecked
three, Q: which payment way you can settle for ?
A: TT, western union .
four, Q: how about your payment way ?
A: one hundred%payment EPTd much less $5000 ,thirty% payment EPTd payment , 70% payment before sending in excess of $5000.
five, Q: how about your EPT of velocity reduction motor ?
A: plywood scenario ,if dimensions is little ,we will pack with pallet for considerably less 1 container
6, Q: What info ought to be provided, if I purchase electric helical EPTed motor from you ?
A: rated EPT, ratio or output speed,kind ,voltage , mounting way , amount , if much more is much better.
China Best Worm gearbox manufacturer supplier & factory Ta Series Shaft Mounted Helical Gearbox Shaft Mounted Gear Reducers Shaft Mounted Reducer Gear Gearbox with Tension Arm with top quality best prices
We – EPG Group the largest worm gearbox, couplings and gears manufacturing facility in China with 5 various branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
Ta Sequence shaft mounted helical gearbox shaft mounted equipment gearboxes Shaft Mounted Reducer Gear Gearbox with Pressure Arm
| electric powered motor |
| motor |
| geared motor |
| gear |
| transmission gearbox |
| equipment box |
| spare elements |
| equipment motor |
| geared motor |
| transmission |
A collection shaft mounted gearbox, shaft mounted speed gearbox, shaft mounted gear gearboxes, gilera fxr mounting shaft, gearbox shaft mounted, shaft mounted gearbox,
shaft mounted helical gearbox, shaft mounted, shaft mounted gearbox, motogearbox
hollow shaft mount gearbox for conveyor belt systerms, hanging gearbox
Firm information
Proven in 1985, SANLIAN TRANSMISSION MACHINERY CO., LTD is a substantial and new technologies company engaging in investigation, develop and manufacture for gearbox & speed variator, one of the director member of China Reducer Association of China Common Equipment.
It covers a lot more than 40,000 sq. meters, has much more than four hundred employees , 20% of whom are experts, outfitted with far more than 300 sets the most advanced exact numerical control equipment, which includes German HOFLER forming gear grinding machine to boost quality.
set up much more than thirty nationwide revenue branches to provide our customers in time and extensively.
Our products also exported to much more than thirty countries main in Europe, Asia America, and Africa, with higher popularity.
High quality manage
Packing
Related GEARBOX types
| Precision Planetary gearbox | Robot RV gearbox pace gearbox |
| Customized manufactured Non-common Gearbox | UDL Collection Variator |
| PYZ Sequence Helical Tooth Shaft Mounted Reducer | 8000 Collection Cycloidal Reducer |
| SLT Series Spiral Bevel Gearbox | SLSWL Collection Worm Screw Jack |
| SLP Sequence Planetary Reducer | SLH/SLB Collection Large Electrical power Reducer |
| NMRV Collection Worm Reducer | BKM Series Helical-hypoid Reducer |
| SLRC Collection Helical Reducer | SLSMR Collection Shaft Mounted Reducer |
| SLXG Sequence Shaft Mounted Reducer | X/B Sequence Cycloidal Reducer |
| SLR/SLF/SLK/SLS Collection Helical Reducer | AC/DC Motor |
Main solution record: 16 sequence including SLR/SLS/SLK/SLF series tough tooth flank gear gearbox , SLRC collection aluminium case helical equipment gearboxes,SLHSLB collection substantial energy velocity gearbox, SLP collection planetary pace gearbox, X/B collection cycloidal gearbox, SLXG series shaft-mounted gear box, SLSWL collection worm screw jack, SLT series helical cone gear box, altogether a lot more than ten,000 ratios, different specification make us at the head of domestic transmission industry, broadly serve the mechanical transmission area of light & hefty ept this kind of as: beer & beverage, mining device, meals packing, textile printing, rubber & plastic substance, petrochemical business, jack-up transportation, pharmacy & procedure hides, environmental safety equipment.
Certificate
FAQ
one.Payment Expression: TT, L/C
2.Delivery time: about thirty times from get payment.
3.We acknowledge custom-made items as per your particular requirement.
4.Xihu (West Lake) Dis.traces for the Variety:Typically we can pick one particular machine which is suited for you with some informations from you,these kinds of as ratio/motor pace/mounting dimension/ out torque etc.
5.If the minimal get quantity is in excessive of $10000, there are preferential.
Q1: What data should I explain to you to confirm the merchandise?
A:Model/Dimension, Transmission Ratio, Shaft instructions & Get amount.
Q2: What can i do if I don’t know which one particular I require?
A:Dont fret, Deliver as significantly details as you can, our team will help you find the appropriate 1 you are bathroom ept for.
Q3: What is your product warranty interval?
A:We provide one yr warranty because the vessel departure date still left China.
Q4: Are you ept company or maker ?
A: We are manufacturing unit.
Q5: How prolonged is your shipping and delivery time?
A: Normally it is 5-10 days if the products are in stock. or it is 15-20 times if the goods are not in stock, it is in accordance to amount.
Q6: Do you supply samples ? is it totally free or further ?
A: Of course, we could offer the sample for free charge but do not pay the price of freight.
Q7: What is your phrases of payment ?
A: Payment=1000USD, 30% T/T in ept ,harmony before shippment.
If you have another query, pls really feel free to contact us as under:
Contact Us
/ The use of unique equipment manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the shown substitution parts contained herein are not sponsored, accredited, or produced by the OEM. /
Planet the worm gear shaft best China in Pointe-Noire Congo Transmission Spline Gear Shaft with top quality
We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
/
Q:What`s the MOQ of your products?
A:1 set,we can also deal with the sample order. and the large-quantity.
Q:How could i know if the product suitable for my machine?
A:Our sales will contact with you to make sure the particular size,data and other important details of your aimed products.We make sure all the products fit for your machine.
Q:I want to find a new supplier for products,can you?
A:Sure,we can provide the whole day service for your consulting,we aim at being your most important supplier.
Q:What`s the payment terms of the order?
A:As your requirement,we can accept several kinds of payment terms.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
/